|Material:||100% Virgin Tungsten Carbide||Hardness:||90.0-92.3HRA|
|TRS:||2400-2800Mpa||Type:||Hand Tool Parts|
tungsten carbide rotary burrs,
solid carbide burrs
|Material||100% Tungsten Carbide Raw Material|
|Application||weld preparation, weld smoothing, deburring, chamfering, deflashing, and scale removal, wood carving, farriers, metalsmithing,|
What is the Tungsten Carbide Burs?
Tungsten carbide rotary burrs are more and more widely used in the world for increasing working efficiency to realize the mechanization. It is used mainly as below:
1. Machining the metal cavity, remove the burrs or welds of steels, cast iron and so on.
2. Chamfering, rounding, grooving of mechanic parts.
3. Impeller porting.
4. Polishing the surface of precision parts.
5. Engraving arts on metallic or non-metallic parts.
What does your carbide burs Look Like?
What is the Advantage of Carbide burs?
1, For metal and non-metal (marble, bones and jade) process
2, Can replace the grinding wheel
3, High productive effeciency
4, Long life time with high wearable resistance
What should we pay attention to when we use it?
1. Speed /RPM
The speed at which you use your carbide burrs in your rotary tool will depend on the material you're using it on and the contour being produced but it's safe to say you do not need to exceed speeds of 35,000 RPM.
2. Apply only a little pressure
As with all drill bits and burrs, let the burr do the work and apply only a little pressure otherwise the cutting edges of the flutes will chip away or become smooth too quickly, reducing the life of your burr.
3. Keep The Carbide Burr On The Move
When using your carbide burr try not to keep it still for too long as this will prevent the burr from digging and jabbing into your material causing unsightly marks and roughness.
What is the Specification of your Carbide Burrs?
** Carbide burrs manufactured to your drawings to meet your demands of particular stock removal.
How to produce the Carbide burs?
We can make chemical and geometry analysis for your carbide burs material and make grinding test in our professional laboratory center.
We,Chengdu Fengke Carbide Tools Co., Ltd, is one of the leading carbide manufacturers of China .
Established in 2005, we specialize in Tungsten Carbide products over 14years. Our products consist of all kinds and grades of carbide, mainly for cutting blades,rotary carbide blank,carbide circular knife,carbide scraper blades and handles so on.
Our total production area is 15,000 m2 and production Capacity is over 8,000,000-10,000,000pcs/ Year.
We can also customize all kinds of tungsten carbide products according to your drawing or samples.
Finally we always have stock available.
Address:No.21 Hengsheng Road, Shaqu Town, Dayi County, Chengdu, Sichuan Province, China
Standard export carton packing
2-20 days after confirming order,detail delivery date should be decided according to
production season and order quantity
Contact Person: Ms. YOYO
Tel: +86 135 5032 3841